Laser light used to cool object to quantum ground state

ScienceDaily (Oct. 9, 2011) — For the first time, researchers at the California Institute of Technology (Caltech), in collaboration with a team from the University of Vienna, have managed to cool a miniature mechanical object to its lowest possible energy state using laser light. The achievement paves the way for the development of exquisitely sensitive detectors as well as for quantum experiments that scientists have long dreamed of conducting.

"We've taken a solid mechanical system -- one made up of billions of atoms -- and used optical light to put it into a state in which it behaves according to the laws of quantum mechanics. In the past, this has only been achieved with trapped single atoms or ions," says Oskar Painter, professor of applied physics and executive officer for applied physics and materials science at Caltech and the principal investigator on a paper describing the work that appears in the October 6 issue of the journal Nature.

As described in the paper, Painter and his colleagues have engineered a nanoscale object -- a tiny mechanical silicon beam -- such that laser light of a carefully selected frequency can enter the system and, once reflected, can carry thermal energy away, cooling the system.

By carefully designing each element of the beam as well as a patterned silicon shield that isolates it from the environment, Painter and colleagues were able to use the laser cooling technique to bring the system down to the quantum ground state, where mechanical vibrations are at an absolute minimum. Such a cold mechanical object could help detect very small forces or masses, whose presence would normally be masked by the noisy thermal vibrations of the sensor.

"In many ways, the experiment we've done provides a starting point for the really interesting quantum-mechanical experiments one wants to do," Painter says. For example, scientists would like to show that a mechanical system could be coaxed into a quantum superposition -- a bizarre quantum state in which a physical system can exist in more than one position at once. But they need a system at the quantum ground state to begin such experiments.

To reach the ground state, Painter's group had to cool its mechanical beam to a temperature below 100 millikelvin (-273.15°C). That's because the beam is designed to vibrate at gigahertz frequencies (corresponding to a billion cycles per second) -- a range where a large number of phonons are present at room temperature. Phonons are the most basic units of vibration just as the most basic units or packets of light are called photons. All of the phonons in a system have to be removed to cool it to the ground state.

Conventional means of cryogenically cooling to such temperatures exist but require expensive and, in some cases, impractical equipment. There's also the problem of figuring out how to measure such a cold mechanical system. To solve both problems, the Caltech team used a different cooling strategy.

"What we've done is used the photons -- the light field -- to extract phonons from the system," says Jasper Chan, lead author of the new paper and a graduate student in Painter's group. To do so, the researchers drilled tiny holes at precise locations in their mechanical beam so that when they directed laser light of a particular frequency down the length of the beam, the holes acted as mirrors, trapping the light in a cavity and causing it to interact strongly with the mechanical vibrations of the beam.

Because a shift in the frequency of the light is directly related to the thermal motion of the mechanical object, the light -- when it eventually escapes from the cavity -- also carries with it information about the mechanical system, such as the motion and temperature of the beam. Thus, the researchers have created an efficient optical interface to a mechanical element -- or an optomechanical transducer -- that can convert information from the mechanical system into photons of light.

Importantly, since optical light, unlike microwaves or electrons, can be transmitted over large, kilometer-length distances without attenuation, such an optomechanical transducer could be useful for linking different quantum systems -- a microwave system with an optical system, for example. While Painter's system involves an optical interface to a mechanical element, other teams have been developing systems that link a microwave interface to a mechanical element. What if those two mechanical elements were the same? "Then," says Painter, "I could imagine connecting the microwave world to the optical world via this mechanical conduit one photon at a time."

The Caltech team isn't the first to cool a nanomechanical object to the quantum ground state; a group led by former Caltech postdoctoral scholar Andrew Cleland, now at the University of California, Santa Barbara, accomplished this in 2010 using more conventional refrigeration techniques, and, earlier this year, a group from the National Institute of Standards and Technology in Boulder, Colorado, cooled an object to the ground state using microwave radiation. The new work, however, is the first in which a nanomechanical object has been put into the ground state using optical light.

"This is an exciting development because there are so many established techniques for manipulating and measuring the quantum properties of systems using optics," Painter says.

The other cooling techniques used starting temperatures of approximately 20 millikelvin -- more than a factor of 10,000 times cooler than room temperature. Ideally, to simplify designs, scientists would like to initiate these experiments at room temperature. Using laser cooling, Painter and his colleagues were able to perform their experiment at a much higher temperature -- only about 10 times lower than room temperature.

The work was supported by Caltech's Kavli Nanoscience Institute; the Defense Advanced Research Projects Agency's Microsystems Technology Office through a grant from the Air Force Office of Scientific Research; the European Commission; the European Research Council; and the Austrian Science Fund.

Recommend this story on Facebook, Twitter,
and Google +1:

Other bookmarking and sharing tools:

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by California Institute of Technology, via EurekAlert!, a service of AAAS.

Journal Reference:

Jasper Chan, T. P. Mayer Alegre, Amir H. Safavi-Naeini, Jeff T. Hill, Alex Krause, Simon Gröblacher, Markus Aspelmeyer, Oskar Painter. Laser cooling of a nanomechanical oscillator into its quantum ground state. Nature, 2011; 478 (7367): 89 DOI: 10.1038/nature10461

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

View the original article here

Laser light used to cool object to quantum ground state

ScienceDaily (Oct. 9, 2011) — For the first time, researchers at the California Institute of Technology (Caltech), in collaboration with a team from the University of Vienna, have managed to cool a miniature mechanical object to its lowest possible energy state using laser light. The achievement paves the way for the development of exquisitely sensitive detectors as well as for quantum experiments that scientists have long dreamed of conducting.

"We've taken a solid mechanical system -- one made up of billions of atoms -- and used optical light to put it into a state in which it behaves according to the laws of quantum mechanics. In the past, this has only been achieved with trapped single atoms or ions," says Oskar Painter, professor of applied physics and executive officer for applied physics and materials science at Caltech and the principal investigator on a paper describing the work that appears in the October 6 issue of the journal Nature.

As described in the paper, Painter and his colleagues have engineered a nanoscale object -- a tiny mechanical silicon beam -- such that laser light of a carefully selected frequency can enter the system and, once reflected, can carry thermal energy away, cooling the system.

By carefully designing each element of the beam as well as a patterned silicon shield that isolates it from the environment, Painter and colleagues were able to use the laser cooling technique to bring the system down to the quantum ground state, where mechanical vibrations are at an absolute minimum. Such a cold mechanical object could help detect very small forces or masses, whose presence would normally be masked by the noisy thermal vibrations of the sensor.

"In many ways, the experiment we've done provides a starting point for the really interesting quantum-mechanical experiments one wants to do," Painter says. For example, scientists would like to show that a mechanical system could be coaxed into a quantum superposition -- a bizarre quantum state in which a physical system can exist in more than one position at once. But they need a system at the quantum ground state to begin such experiments.

To reach the ground state, Painter's group had to cool its mechanical beam to a temperature below 100 millikelvin (-273.15°C). That's because the beam is designed to vibrate at gigahertz frequencies (corresponding to a billion cycles per second) -- a range where a large number of phonons are present at room temperature. Phonons are the most basic units of vibration just as the most basic units or packets of light are called photons. All of the phonons in a system have to be removed to cool it to the ground state.

Conventional means of cryogenically cooling to such temperatures exist but require expensive and, in some cases, impractical equipment. There's also the problem of figuring out how to measure such a cold mechanical system. To solve both problems, the Caltech team used a different cooling strategy.

"What we've done is used the photons -- the light field -- to extract phonons from the system," says Jasper Chan, lead author of the new paper and a graduate student in Painter's group. To do so, the researchers drilled tiny holes at precise locations in their mechanical beam so that when they directed laser light of a particular frequency down the length of the beam, the holes acted as mirrors, trapping the light in a cavity and causing it to interact strongly with the mechanical vibrations of the beam.

Because a shift in the frequency of the light is directly related to the thermal motion of the mechanical object, the light -- when it eventually escapes from the cavity -- also carries with it information about the mechanical system, such as the motion and temperature of the beam. Thus, the researchers have created an efficient optical interface to a mechanical element -- or an optomechanical transducer -- that can convert information from the mechanical system into photons of light.

Importantly, since optical light, unlike microwaves or electrons, can be transmitted over large, kilometer-length distances without attenuation, such an optomechanical transducer could be useful for linking different quantum systems -- a microwave system with an optical system, for example. While Painter's system involves an optical interface to a mechanical element, other teams have been developing systems that link a microwave interface to a mechanical element. What if those two mechanical elements were the same? "Then," says Painter, "I could imagine connecting the microwave world to the optical world via this mechanical conduit one photon at a time."

The Caltech team isn't the first to cool a nanomechanical object to the quantum ground state; a group led by former Caltech postdoctoral scholar Andrew Cleland, now at the University of California, Santa Barbara, accomplished this in 2010 using more conventional refrigeration techniques, and, earlier this year, a group from the National Institute of Standards and Technology in Boulder, Colorado, cooled an object to the ground state using microwave radiation. The new work, however, is the first in which a nanomechanical object has been put into the ground state using optical light.

"This is an exciting development because there are so many established techniques for manipulating and measuring the quantum properties of systems using optics," Painter says.

The other cooling techniques used starting temperatures of approximately 20 millikelvin -- more than a factor of 10,000 times cooler than room temperature. Ideally, to simplify designs, scientists would like to initiate these experiments at room temperature. Using laser cooling, Painter and his colleagues were able to perform their experiment at a much higher temperature -- only about 10 times lower than room temperature.

The work was supported by Caltech's Kavli Nanoscience Institute; the Defense Advanced Research Projects Agency's Microsystems Technology Office through a grant from the Air Force Office of Scientific Research; the European Commission; the European Research Council; and the Austrian Science Fund.

Recommend this story on Facebook, Twitter,
and Google +1:

Other bookmarking and sharing tools:

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by California Institute of Technology, via EurekAlert!, a service of AAAS.

Journal Reference:

Jasper Chan, T. P. Mayer Alegre, Amir H. Safavi-Naeini, Jeff T. Hill, Alex Krause, Simon Gröblacher, Markus Aspelmeyer, Oskar Painter. Laser cooling of a nanomechanical oscillator into its quantum ground state. Nature, 2011; 478 (7367): 89 DOI: 10.1038/nature10461

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

View the original article here

Scientists observe how superconducting nanowires lose resistance-free state

ScienceDaily (Sep. 22, 2011) — Even with today's invisibility cloaks, people can't walk through walls. But, when paired together, millions of electrons can. The electrons perform this trick, called macroscopic quantum tunneling, when they pair up and move into a region of space that is normally off-limits under the laws of classical mechanics. The problem is that as millions of electrons collectively move through a superconducting nanowire, they use energy and give off heat.

The heat can build, transforming sections of the wire into a non-superconducting state. The process, called a phase slip, adds resistance to an electrical system and has implications for designing new nano-scale superconductors.

Now, scientists have observed individual phase slips in aluminum nanowires and characterized the nature and temperature at which they occur. This information could help scientists remove phase slips from nano-scale systems, which could lead to more reliable nanowires and more efficient nano-electronics, said Duke physicist Albert Chang.

The results appeared online Sept. 21 in Physical Review Letters.

The macroscopic quantum tunneling effect was first observed in a system called a Josephson junction. This device has a thin insulating layer connecting two superconductors, which are several nanometers wide and have a three-dimensional shape.

To study the tunneling and phase slips in a simpler system, however, Chang and his colleagues used individual, one-dimensional nanowires made of aluminum. The new observations are "arguably the first convincing demonstration of tunneling of millions of electrons in one-dimensional superconducting nanowires," said Chang, who led the study.

In the experiment, the wires ranged in length from 1.5 to 10 micrometers, with widths from five to 10 nanometers. Chang cooled the wires to a temperature close to absolute zero, roughly 1 degree Kelvin or -458 degrees Fahrenheit.

At this temperature, a metal's crystal lattice vibrates in a way that allows electrons to overcome their negative repulsion of one other. The electrons make pairs and electric current flows essentially resistance-free, forming a superconductor.

The electron pairs move together in a path in a quantum-mechanical space, which resembles the curled cord of an old phone. On their way around the path, all of the electrons have to scale a barrier or a wall. Moving past this wall collectively keeps the electrons paired and the superconducting current stable.

But, the collective effort takes energy and gives off heat. With successive scaling attempts, the heat builds, causing a section of the wire to experience a phase slip from a superconducting to a non-superconducting state.

To pinpoint precisely how phase slips happen, Chang varied the temperatures and amount of current run through the aluminum nanowires.

The experiments show that at higher temperatures, roughly 1.5 degrees Kelvin and close to the critical temperature where the wires naturally become non-superconducting, the electrons have enough energy to move over the wall that keeps the electrons paired and the superconducting current stable.

In contrast, the electrons in the nanowires cooled to less than 1 degree Kelvin do not have the energy to scale the wall. Instead, the electrons tunnel, or go through the wall together, all at once, said Duke physicist Gleb Finkelstein, one of Chang's collaborators.

The experiments also show that at the relatively higher temperatures, individual jumps over the wall don't create enough heat to cause a breakdown in superconductivity. But multiple jumps do.

At the lowest temperatures, however, the paired electrons only need to experience one successful attempt at the wall, either over or through it, to create enough heat to slip in phase and break the superconducting state.

Studying the electrons' behavior at specific temperatures provides scientists with information to build ultra-thin superconducting wires that might not have phase slips. Chang said the improved wires could soon play a role in ultra-miniaturized electrical components for ultra-miniaturized electronics, such as the quantum bit, used in a quantum computer.

Recommend this story on Facebook, Twitter,
and Google +1:

Other bookmarking and sharing tools:

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by Duke University.

Journal Reference:

Peng Li, Phillip Wu, Yuriy Bomze, Ivan Borzenets, Gleb Finkelstein, A. Chang. Switching Currents Limited by Single Phase Slips in One-Dimensional Superconducting Al Nanowires. Physical Review Letters, 2011; 107 (13) DOI: 10.1103/PhysRevLett.107.137004

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

View the original article here

Scientists observe how superconducting nanowires lose resistance-free state

ScienceDaily (Sep. 22, 2011) — Even with today's invisibility cloaks, people can't walk through walls. But, when paired together, millions of electrons can. The electrons perform this trick, called macroscopic quantum tunneling, when they pair up and move into a region of space that is normally off-limits under the laws of classical mechanics. The problem is that as millions of electrons collectively move through a superconducting nanowire, they use energy and give off heat.

The heat can build, transforming sections of the wire into a non-superconducting state. The process, called a phase slip, adds resistance to an electrical system and has implications for designing new nano-scale superconductors.

Now, scientists have observed individual phase slips in aluminum nanowires and characterized the nature and temperature at which they occur. This information could help scientists remove phase slips from nano-scale systems, which could lead to more reliable nanowires and more efficient nano-electronics, said Duke physicist Albert Chang.

The results appeared online Sept. 21 in Physical Review Letters.

The macroscopic quantum tunneling effect was first observed in a system called a Josephson junction. This device has a thin insulating layer connecting two superconductors, which are several nanometers wide and have a three-dimensional shape.

To study the tunneling and phase slips in a simpler system, however, Chang and his colleagues used individual, one-dimensional nanowires made of aluminum. The new observations are "arguably the first convincing demonstration of tunneling of millions of electrons in one-dimensional superconducting nanowires," said Chang, who led the study.

In the experiment, the wires ranged in length from 1.5 to 10 micrometers, with widths from five to 10 nanometers. Chang cooled the wires to a temperature close to absolute zero, roughly 1 degree Kelvin or -458 degrees Fahrenheit.

At this temperature, a metal's crystal lattice vibrates in a way that allows electrons to overcome their negative repulsion of one other. The electrons make pairs and electric current flows essentially resistance-free, forming a superconductor.

The electron pairs move together in a path in a quantum-mechanical space, which resembles the curled cord of an old phone. On their way around the path, all of the electrons have to scale a barrier or a wall. Moving past this wall collectively keeps the electrons paired and the superconducting current stable.

But, the collective effort takes energy and gives off heat. With successive scaling attempts, the heat builds, causing a section of the wire to experience a phase slip from a superconducting to a non-superconducting state.

To pinpoint precisely how phase slips happen, Chang varied the temperatures and amount of current run through the aluminum nanowires.

The experiments show that at higher temperatures, roughly 1.5 degrees Kelvin and close to the critical temperature where the wires naturally become non-superconducting, the electrons have enough energy to move over the wall that keeps the electrons paired and the superconducting current stable.

In contrast, the electrons in the nanowires cooled to less than 1 degree Kelvin do not have the energy to scale the wall. Instead, the electrons tunnel, or go through the wall together, all at once, said Duke physicist Gleb Finkelstein, one of Chang's collaborators.

The experiments also show that at the relatively higher temperatures, individual jumps over the wall don't create enough heat to cause a breakdown in superconductivity. But multiple jumps do.

At the lowest temperatures, however, the paired electrons only need to experience one successful attempt at the wall, either over or through it, to create enough heat to slip in phase and break the superconducting state.

Studying the electrons' behavior at specific temperatures provides scientists with information to build ultra-thin superconducting wires that might not have phase slips. Chang said the improved wires could soon play a role in ultra-miniaturized electrical components for ultra-miniaturized electronics, such as the quantum bit, used in a quantum computer.

Recommend this story on Facebook, Twitter,
and Google +1:

Other bookmarking and sharing tools:

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by Duke University.

Journal Reference:

Peng Li, Phillip Wu, Yuriy Bomze, Ivan Borzenets, Gleb Finkelstein, A. Chang. Switching Currents Limited by Single Phase Slips in One-Dimensional Superconducting Al Nanowires. Physical Review Letters, 2011; 107 (13) DOI: 10.1103/PhysRevLett.107.137004

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

View the original article here

Shaking down frozen helium: In a 'supersolid' state, it has liquid-like characteristics

ScienceDaily (May 12, 2011) — In a four-decade, Holy Grail-like quest to fully understand what it means to be in a "supersolid" state, physicists have found that supersolid isn't always super solid. In other words, this exotic state of frozen helium appears to have liquid-like properties, says a new paper published in the journal Science.

Why is this important? Understanding supersolid helium brings us closer to understanding its close cousins superconductivity and superfluidity.

Physicists had long thought that the unusual behavior of torsion oscillators containing solid helium meant that chilling helium down to temperatures near absolute zero prompts its transformation into a supersolid. It is certainly solid, but in this physical quest, there was a nagging question: Is it a true supersolid?

To gain new perspectives on solid helium, new research tools were needed. "Think of this analogy: when Galileo first peered through a telescope, he saw ears on Saturn. With improved technology, humanity began to understand those ears were actually rings around the planet. And with better technology, we saw the differences in the rings. To further understand solid helium, science had to invent new approaches," says Séamus Davis, Cornell professor of physics. "Helium is a pure material. We're gaining a new understanding of the fundamental issues of how nature works, of how the universe works."

In fact, in this paper, the researchers show instead a more prosaic explanation: There are moving defects in the solid helium crystals, and their relaxation time falls with rising temperatures. This is more consistent with the torsional oscillation (shaking) experiments conducted at Cornell.

The researchers learned that the unusual properties of solid helium do not reflect a clunky transition between the solid state and a supersolid state. It behaves like a dimmer switch and presents a smooth transition near absolute zero.

Funding for this research: the National Science Foundation and the Kavli Institute for Theoretical Physics. Research at Los Alamos was supported by U.S. Department of Energy, through the Laboratory Directed Research and Development program.

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by Cornell University, via EurekAlert!, a service of AAAS.

Journal Reference:

E. J. Pratt, B. Hunt, V. Gadagkar, M. Yamashita, M. J. Graf, A. V. Balatsky, and J. C. Davis. Interplay of Rotational, Relaxational, and Shear Dynamics in Solid 4He. Science, 13 May 2011: Vol. 332 no. 6031 pp. 821-824 DOI: 10.1126/science.1203080

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

View the original article here