High-quality white light produced by four-color laser source; Diode lasers could challenge LEDs for home and industrial lighting supremacy

ScienceDaily (Oct. 26, 2011) — The human eye is as comfortable with white light generated by diode lasers as with that produced by increasingly popular light-emitting diodes (LEDs), according to tests conceived at Sandia National Laboratories.

Both technologies pass electrical current through material to generate light, but the simpler LED emits lights only through spontaneous emission. Diode lasers bounce light back and forth internally before releasing it.

The finding is important because LEDs -- widely accepted as more efficient and hardier replacements for century-old tungsten incandescent bulb technology -- lose efficiency at electrical currents above 0.5 amps. However, the efficiency of a sister technology -- the diode laser -- improves at higher currents, providing even more light than LEDs at higher amperages.

"What we showed is that diode lasers are a worthy path to pursue for lighting," said Sandia researcher Jeff Tsao, who proposed the comparative experiment. "Before these tests, our research in this direction was stopped before it could get started. The typical response was, 'Are you kidding? The color rendering quality of white light produced by diode lasers would be terrible.' So finally it seemed like, in order to go further, one really had to answer this very basic question first."

Little research had been done on diode lasers for lighting because of a widespread assumption that human eyes would find laser-based white light unpleasant. It would comprise four extremely narrow-band wavelengths -- blue, red, green, and yellow -- and would be very different from sunlight, for example, which blends a wide spectrum of wavelengths with no gaps in between. Diode laser light is also ten times narrower than that emitted by LEDs.

The tests -- a kind of high-tech market research -- took place at the University of New Mexico's Center for High Technology Materials. Forty volunteers were seated, one by one, before two near-identical scenes of fruit in bowls, housed in adjacent chambers. Each bowl was randomly illuminated by warm, cool, or neutral white LEDs, by a tungsten-filament incandescent light bulb, or by a combination of four lasers (blue, red, green, yellow) tuned so their combination produced a white light.

The experiment proceeded like an optometrist's exam: the subjects were asked: Do you prefer the left picture, or the right? All right, how about now?

The viewers were not told which source provided the illumination. They were instructed merely to choose the lit scene with which they felt most comfortable. The pairs were presented in random order to ensure that neither sequence nor tester preconceptions played roles in subject choices, but only the lighting itself. The computer program was written, and the set created, by Alexander Neumann, a UNM doctoral student of CHTM director Steve Brueck.

Each participant, selected from a variety of age groups, was asked to choose 80 times between the two changing alternatives, a procedure that took ten to twenty minutes, said Sandia scientist Jonathan Wierer, who helped plan, calibrate and execute the experiments. Five results were excluded when the participants proved to be color-blind. The result was that there was a statistically significant preference for the diode-laser-based white light over the warm and cool LED-based white light, Wierer said, but no statistically significant preference between the diode-laser-based and either the neutral LED-based or incandescent white light.

The results probably won't start a California gold rush of lighting fabricators into diode lasers, said Tsao, but they may open a formerly ignored line of research. Diode lasers are slightly more expensive to fabricate than LEDs because their substrates must have fewer defects than those used for LEDs. Still, he said, such substrates are likely to become more available in the future because they improve LED performance as well.

Also, while blue diode lasers have good enough performance that the automaker BMW is planning their use in its vehicles' next-generation white headlights, performance of red diode lasers is not as good, and yellow and green have a ways to go before they are efficient enough for commercial lighting opportunities.

Still, says Tsao, a competition wouldn't have to be all or nothing. Instead, he said, a cooperative approach might use blue and red diode lasers with yellow and green LEDs. Or blue diode lasers could be used to illuminate phosphors -- the technique currently used by fluorescent lights and the current generation of LED-based white light -- to create desirable shades of light.

The result makes possible still further efficiencies for the multibillion dollar lighting industry. The so-called ''smart beams'' can be adjusted on site for personalized color renderings for health reasons and, because they are directional, also can provide illumination precisely where it's wanted.

Colorimetric and experimental guidance was provided by the National Institute of Standards and Technology.

The research was published in the July 1 issue of Optics Express.

This work was conducted as part of the Solid-State Lighting Science Energy Frontier Research Center, funded by the U.S. DOE Office of Science.

Recommend this story on Facebook, Twitter,
and Google +1:

Other bookmarking and sharing tools:

Story Source:

The above story is reprinted from materials provided by DOE/Sandia National Laboratories.

Note: Materials may be edited for content and length. For further information, please contact the source cited above.

Journal Reference:

A. Neumann, J. J. Wierer, W. Davis, Y. Ohno, S. R. J. Brueck, J.Y. Tsao. Four-color laser white illuminant demonstrating high color-rendering quality. Optics Express, 2011; 19 (S4): A982 DOI: 10.1364/OE.19.00A982

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

View the original article here

Borrowing from brightly-colored birds: Physicists develop lasers inspired by nature

ScienceDaily (Oct. 13, 2011) — Researchers at Yale University are studying how two types of nanoscale structures on the feathers of birds produce brilliant and distinctive colors. The researchers are hoping that by borrowing these nanoscale tricks from nature they will be able to produce new types of lasers -- ones that can assemble themselves by natural processes.

The team will present their findings at the Optical Society's (OSA) Annual Meeting, Frontiers in Optics (FiO) 2011 (http://www.frontiersinoptics.com/), taking place in San Jose, Calif. next week.

Many of the colors displayed in nature are created by nanoscale structures that scatter light strongly at specific frequencies. In some cases, these structures create iridescence, where colors change with the angle of view -- like the shifting rainbows on a soap bubble. In other cases, the hues produced by the structures are steady and unchanging. The mechanism by which angle-independent colors are produced stumped scientists for 100 years: at first glance, these steady hues appeared to have been produced by a random jumble of proteins. But when researchers zoomed in on small sections of the protein at a time, quasi-ordered patterns began to emerge. The scientists found that it is this short-range order that scatters light preferentially at specific frequencies to produce the distinctive hues of a bluebird's wings, for example.

Inspired by feathers, the Yale physicists created two lasers that use this short-range order to control light. One model is based on feathers with tiny spherical air cavities packed in a protein called beta-keratin. The laser based on this model consists of a semiconductor membrane full of tiny air holes that trap light at certain frequencies. Quantum dots embedded between the holes amplify the light and produce the coherent beam that is the hallmark of a laser. The researchers also built a network laser using a series of interconnecting nano-channels, based on their observations of feathers whose beta-keratin takes the form of interconnecting channels in "tortuous and twisting forms." The network laser produces its emission by blocking certain colors of light while allowing others to propagate. In both cases, researchers can manipulate the lasers' colors by changing the width of the nano-channels or the spacing between the nano-holes.

What makes these short-range-ordered, bio-inspired structures different from traditional lasers is that, in principle, they can self-assemble, through natural processes similar to the formation of gas bubbles in a liquid. This means that engineers would not have to worry about the nanofabrication of the large-scale structure of the materials they design, resulting in cheaper, faster, and easier production of lasers and light-emitting devices.

One potential application for this work includes more efficient solar cells that can trap photons before converting them into electrons. The technology could also yield long-lasting paint, which could find uses in processes such as cosmetics and textiles. "Chemical paint will always fade," says lead author Hui Cao. But a physical "paint" whose nanostructure determines its color will never change. Cao describes a 40-million-year-old beetle fossil that her lab examined recently, and which had color-producing nanostructures. "With my eyes I can still see the color," she said. "It really lasts for a very long time."

Recommend this story on Facebook, Twitter,
and Google +1:

Other bookmarking and sharing tools:

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by Optical Society of America, via EurekAlert!, a service of AAAS.

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

View the original article here

Borrowing from brightly-colored birds: Physicists develop lasers inspired by nature

ScienceDaily (Oct. 13, 2011) — Researchers at Yale University are studying how two types of nanoscale structures on the feathers of birds produce brilliant and distinctive colors. The researchers are hoping that by borrowing these nanoscale tricks from nature they will be able to produce new types of lasers -- ones that can assemble themselves by natural processes.

The team will present their findings at the Optical Society's (OSA) Annual Meeting, Frontiers in Optics (FiO) 2011 (http://www.frontiersinoptics.com/), taking place in San Jose, Calif. next week.

Many of the colors displayed in nature are created by nanoscale structures that scatter light strongly at specific frequencies. In some cases, these structures create iridescence, where colors change with the angle of view -- like the shifting rainbows on a soap bubble. In other cases, the hues produced by the structures are steady and unchanging. The mechanism by which angle-independent colors are produced stumped scientists for 100 years: at first glance, these steady hues appeared to have been produced by a random jumble of proteins. But when researchers zoomed in on small sections of the protein at a time, quasi-ordered patterns began to emerge. The scientists found that it is this short-range order that scatters light preferentially at specific frequencies to produce the distinctive hues of a bluebird's wings, for example.

Inspired by feathers, the Yale physicists created two lasers that use this short-range order to control light. One model is based on feathers with tiny spherical air cavities packed in a protein called beta-keratin. The laser based on this model consists of a semiconductor membrane full of tiny air holes that trap light at certain frequencies. Quantum dots embedded between the holes amplify the light and produce the coherent beam that is the hallmark of a laser. The researchers also built a network laser using a series of interconnecting nano-channels, based on their observations of feathers whose beta-keratin takes the form of interconnecting channels in "tortuous and twisting forms." The network laser produces its emission by blocking certain colors of light while allowing others to propagate. In both cases, researchers can manipulate the lasers' colors by changing the width of the nano-channels or the spacing between the nano-holes.

What makes these short-range-ordered, bio-inspired structures different from traditional lasers is that, in principle, they can self-assemble, through natural processes similar to the formation of gas bubbles in a liquid. This means that engineers would not have to worry about the nanofabrication of the large-scale structure of the materials they design, resulting in cheaper, faster, and easier production of lasers and light-emitting devices.

One potential application for this work includes more efficient solar cells that can trap photons before converting them into electrons. The technology could also yield long-lasting paint, which could find uses in processes such as cosmetics and textiles. "Chemical paint will always fade," says lead author Hui Cao. But a physical "paint" whose nanostructure determines its color will never change. Cao describes a 40-million-year-old beetle fossil that her lab examined recently, and which had color-producing nanostructures. "With my eyes I can still see the color," she said. "It really lasts for a very long time."

Recommend this story on Facebook, Twitter,
and Google +1:

Other bookmarking and sharing tools:

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by Optical Society of America, via EurekAlert!, a service of AAAS.

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

View the original article here

New light shed on the private lives of electrons: Lasers allow scientists to observe how electrons become entangled

ScienceDaily (July 3, 2011) — A Princeton researcher and his international collaborators have used lasers to peek into the complex relationship between a single electron and its environment, a breakthrough that could aid the development of quantum computers.

The technique reveals how an isolated electron and its surroundings develop a relationship known as a Kondo state -- a state of matter that is of great interest to physicists and engineers. The results not only yield insights into a long-standing quandary in theoretical physics, but also may help scientists understand how to store information at the smallest possible scales, which would open vast new realms of computing power.

"What we've done is illuminate the private life of a single electron," said Hakan Tureci, an assistant professor of electrical engineering at Princeton and a lead researcher on the project. "It's taken nearly a century to isolate, control and probe a single electron in this way -- an extraordinary feat enabled by quantum theory, cryogenics and nanotechnology."

The research was conducted by an international team of scientists from the United States, Germany and Switzerland. The researchers on the project included Tureci, Atac Imamoglu, a professor at Swiss Federal Institute of Technology Zurich in Switzerland, Jan von Delft, a professor at LMU Munich, and Leonid Glazman, a professor at Yale University.

The key theoretical results and a proposal for testing the ideas experimentally were published March 11 in the journal Physical Review Letters.

These theoretical projections were recently confirmed in experiments led by Imamoglu, which were published June 29 in the journal Nature.

The research brings fresh insight to the study of the Kondo problem, a phenomenon first observed in the 1930s, when researchers were surprised to find that resistance to electricity flowing through certain metals increases at very low temperatures. Normally, resistance through metals decreases as temperature is lowered, but that was not the case with these metals.

The phenomenon was explained 30 years later by Japanese scientist, Jun Kondo, as resulting from the presence of cobalt or other magnetic impurities in the metals.

Scientists have further realized that the Kondo effect results from a relationship between electrons known as "entanglement" in which the quantum state of one electron is tied to those of neighboring electrons, even if the particles are later separated by considerable distances. In the case of Kondo effect, a trapped electron is entangled in a complex manner with a cloud of surrounding electrons.

Researchers have been intrigued by the Kondo effect in part because understanding how a trapped electron becomes entangled with its environment could help overcome barriers to quantum computing, which could lead to far more powerful computers than currently exist.

Previous observation methods allowed scientists to make measurements of the Kondo state, but could not provide information on how electrons developed such a relationship with their surroundings.

To better understand how an electron gradually becomes entangled in this manner with its environment, Tureci and his collaborators investigated the idea of using a laser to probe electrons evolving into the Kondo state. They first developed a theory about how laser light scattered off electrons could carry information about this process.

Depending on the state of the electron, they surmised, it should absorb different colors of laser light to varying degrees. The light reflected back would carry a signature of the entangled quantum state, offering a window into the relationship between the trapped electron and its environment.

To isolate the electrons, they proposed using nanostructured devices, small machines built one atom at a time that trap the electrons in small wells. The particles are only provided limited isolation in the wells and so eventually become entangled with a cloud of surrounding electrons in the device.

Tureci's collaborators in Switzerland tested the idea by projecting a laser beam on the device and measuring the light that was transmitted.

The light signature matched theoretical predictions. The researchers also found that they could use the light signatures to confirm when they turned the Kondo state off using a magnetic field.

"By doing this experiment," Tureci said, "we showed that you can extract this information that was previously unavailable in earlier experiments on the Kondo effect."

He said the finding could provide insight into quantum computing because entanglement, depending on its nature, could allow new ways of storing and processing information or could threaten to destabilize the computing process.

Whereas current computers use transistors to store "bits" of information as ones or zeros, scientists believe quantum computers might one day use trapped electrons that are entangled with one another as "qubits," the basic information units of quantum computing, which can have the odd quality of representing a blend of "one" and "zero" simultaneously.

A series of qubits could thus store exponentially more information than the 0 and 1 combination of classical bits.

While quantum computers could theoretically be far smaller and faster than transistor-based machines, using electrons or other sub-atomic particles as storage devices is no trivial feat.

The undesirable entangled relationship between electrons and their environment, such as that seen in the Kondo effect, can destabilize the desired relationship between trapped electrons that form the qubits and gradually destroy the information they store.

"Our technique offers a window into the Kondo state, allowing us a chance to study electrons that are highly entangled with their environments and understand how they got that way," Tureci said.

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by Princeton University, Engineering School, via EurekAlert!, a service of AAAS.

Journal Reference:

C. Latta, F. Haupt, M. Hanl, A. Weichselbaum, M. Claassen, W. Wuester, P. Fallahi, S. Faelt, L. Glazman, J. von Delft, H. E. Türeci, A. Imamoglu. Quantum quench of Kondo correlations in optical absorption. Nature, 2011; 474 (7353): 627 DOI: 10.1038/nature10204

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

View the original article here

Lasers used to form 3-D crystals made of nanoparticles

ScienceDaily (June 3, 2011) — University of Michigan physicists used the electric fields generated by intersecting laser beams to trap and manipulate thousands of microscopic plastic spheres, thereby creating 3-D arrays of optically induced crystals.

The technique could someday be used to analyze the structure of materials of biological interest, including bacteria, viruses and proteins, said U-M physicist Georg Raithel.

Raithel is co-author of a research paper on the topic published online May 31 in the journal Physical Review E. The other author is U-M research fellow Betty Slama-Eliau.

The standard method used to characterize biological molecules like proteins involves crystallizing them, then analyzing their structure by bombarding the crystals with X-rays, a technique called X-ray crystallography. But the method cannot be used on many of the proteins of highest interest -- such as cell-membrane proteins -- because there's no way to crystallize those molecules.

"So we came up with this idea that one could use, instead of a conventional crystal, an optically induced crystal in order to get the crystallization of a sample that could be suitable for structural analysis," said Raithel, professor of physics and associate chair of the department.

To move toward that goal, Raithel and his colleagues are developing the laser technique using microscopically small plastic spheres instead of the molecules. Other researchers have created 3-D optically induced crystals, but Raithel said the crystals his team created are denser than those previously achieved.

The process involves shining laser beams through two opposed microscope lenses, one directly beneath the other. Two infrared laser beams are directed through each lens, and they meet at a common focal point on a microscope slide that holds thousands of plastic nanoparticles suspended in a drop of water.

The intersecting laser beams create electric fields that vary in strength in a regular pattern that forms a 3-D grid called an optical lattice. The nanoparticles get sucked into regions of high electric-field strength, and thousands of them align to form optically induced crystals. The crystals are spherical in shape and about 5 microns in diameter. A micron is one millionth of a meter.

Imagine an egg crate containing hundreds of eggs. The cardboard structure of the crate is the optical lattice, and each of the eggs represents one of the nanoparticles. Stack several crates on top of each other and you get a 3-D crystal structure.

"The crate is the equivalent of the optical lattice that the laser beams make," Raithel said. "The structure of the crystal is determined by the egg carton, not by the eggs."

The optical crystals dissipate as soon as the laser is switched off.

The research was funded by the National Science Foundation.

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by University of Michigan.

Journal Reference:

B. Slama-Eliau, G. Raithel. Three-dimensional arrays of submicron particles generated by a four-beam optical lattice. Physical Review E, 2011; 83 (5) DOI: 10.1103/PhysRevE.83.051406

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

View the original article here

Lasers used to form 3-D crystals made of nanoparticles

ScienceDaily (June 3, 2011) — University of Michigan physicists used the electric fields generated by intersecting laser beams to trap and manipulate thousands of microscopic plastic spheres, thereby creating 3-D arrays of optically induced crystals.

The technique could someday be used to analyze the structure of materials of biological interest, including bacteria, viruses and proteins, said U-M physicist Georg Raithel.

Raithel is co-author of a research paper on the topic published online May 31 in the journal Physical Review E. The other author is U-M research fellow Betty Slama-Eliau.

The standard method used to characterize biological molecules like proteins involves crystallizing them, then analyzing their structure by bombarding the crystals with X-rays, a technique called X-ray crystallography. But the method cannot be used on many of the proteins of highest interest -- such as cell-membrane proteins -- because there's no way to crystallize those molecules.

"So we came up with this idea that one could use, instead of a conventional crystal, an optically induced crystal in order to get the crystallization of a sample that could be suitable for structural analysis," said Raithel, professor of physics and associate chair of the department.

To move toward that goal, Raithel and his colleagues are developing the laser technique using microscopically small plastic spheres instead of the molecules. Other researchers have created 3-D optically induced crystals, but Raithel said the crystals his team created are denser than those previously achieved.

The process involves shining laser beams through two opposed microscope lenses, one directly beneath the other. Two infrared laser beams are directed through each lens, and they meet at a common focal point on a microscope slide that holds thousands of plastic nanoparticles suspended in a drop of water.

The intersecting laser beams create electric fields that vary in strength in a regular pattern that forms a 3-D grid called an optical lattice. The nanoparticles get sucked into regions of high electric-field strength, and thousands of them align to form optically induced crystals. The crystals are spherical in shape and about 5 microns in diameter. A micron is one millionth of a meter.

Imagine an egg crate containing hundreds of eggs. The cardboard structure of the crate is the optical lattice, and each of the eggs represents one of the nanoparticles. Stack several crates on top of each other and you get a 3-D crystal structure.

"The crate is the equivalent of the optical lattice that the laser beams make," Raithel said. "The structure of the crystal is determined by the egg carton, not by the eggs."

The optical crystals dissipate as soon as the laser is switched off.

The research was funded by the National Science Foundation.

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by University of Michigan.

Journal Reference:

B. Slama-Eliau, G. Raithel. Three-dimensional arrays of submicron particles generated by a four-beam optical lattice. Physical Review E, 2011; 83 (5) DOI: 10.1103/PhysRevE.83.051406

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

View the original article here