Scientists Produce World's First Magnetic Soap

The liquid crystal progression of each surfactant was investigated by the solvent penetration method (i.e. phase cut). A small amount of surfactant was placed on a microscope slide under a coverslip. The slide was mounted on the cover slide and heated until the sample was fluid and completely isotropic. After slow cooling (1.0 °C min-1) to 25 °C, a drop of water was added to the edge of the coverslip. As the water penetrated the surfactant, a concentration gradient was established, from water at one side to pure surfactant at the other, enabling the entire range of mesophases to be observed in the field of view. (Credit: Image courtesy of Institut Laue-Langevin (ILL))


ScienceDaily (Jan. 23, 2012) — Scientists from Bristol University have developed a soap, composed of iron rich salts dissolved in water, that responds to a magnetic field when placed in solution. The soap’s magnetic properties were shown with neutrons at the Institut Laue-Langevin to result from tiny iron-rich clumps that sit within the watery solution. The generation of this property in a fully functional soap could calm concerns over the use of soaps in oil-spill clean ups and revolutionise industrial cleaning products.


Scientists have long been searching for a way to control soaps (or surfactants as they are known in industry) once they are in solution to increase their ability to dissolve oils in water and then remove them from a system. The team at Bristol University have previously worked on soaps sensitive to light, carbon dioxide or changes in pH, temperature or pressure. Their latest breakthrough, reported inAngewandte Chemie, is the world’s first soap sensitive to a magnetic field.

Ionic liquid surfactants, composed mostly of water with some transition metal complexes (heavy metals like iron bound to halides such as bromine or chlorine) have been suggested as potentially controllable by magnets for some time, but it had always been assumed that their metallic centres were too isolated within the solution, preventing the long-range interactions required to be magnetically active.

The team at Bristol, lead by Professor Julian Eastoe produced their magnetic soap by dissolving iron in a range of inert surfactant materials composed of chloride and bromide ions, very similar to those found in everyday mouthwash or fabric conditioner. The addition of the iron creates metallic centres within the soap particles.

To test its properties, the team introduced a magnet to a test tube containing their new soap lying beneath a less dense organic solution. When the magnet was introduced the iron-rich soap overcame both gravity and surface tension between the water and oil, to levitate through the organic solvent and reach the source of the magnetic energy, proving its magnetic properties.

Once the surfactant was developed and shown to be magnetic, Prof Eastoe’s team took it to the Institut Laue-Langevin, the world’s flagship centre for neutron science, and home to the world’s most intense neutron source, to investigate the science behind its remarkable property.

When surfactants are added to water they are known to form tiny clumps (particles called micelles). Scientists at ILL used a technique called “small angle neutron scattering (SANS)” to confirm that it was this clumping of the iron-rich surfactant that brought about its magnetic properties.

Dr Isabelle Grillo, responsible of the Chemistry Laboratories at ILL: “The particles of surfactant in solution are small and thus difficult to see using light but are easily revealed by SANS which we use to investigate the structure and behaviour of all types of materials with typical sizes ranging from the nanometer to the tenth of micrometer.”

The potential applications of magnetic surfactants are huge. Their responsiveness to external stimuli allows a range of properties, such as their electrical conductivity, melting point, the size and shape of aggregates and how readily its dissolves in water to be altered by a simple magnetic on and off switch. Traditionally these factors, which are key to the effective application of soaps in a variety of industrial settings, could only be controlled by adding an electric charge or changing the pH, temperature or pressure of the system, all changes that irreversibly alter the system composition and cost money to remediate.

Its magnetic properties also makes it easier to round up and remove from a system once it has been added, suggesting further applications in environmental clean ups and water treatment. Scientific experiments which require precise control of liquid droplets could also be made easier with the addition of this surfactant and a magnetic field.

Professor Julian Eastoe, University of Bristol: “As most magnets are metals, from a purely scientific point of view these ionic liquid surfactants are highly unusual, making them a particularly interesting discovery. From a commercial point of view, though these exact liquids aren’t yet ready to appear in any household product, by proving that magnetic soaps can be developed, future work can reproduce the same phenomenon in more commercially viable liquids for a range of applications from water treatment to industrial cleaning products.”

Peter Dowding an industrial chemist, not involved in the research: “Any systems which act only when responding to an outside stimulus that has no effect on its composition is a major breakthrough as you can create products which only work when they are needed to. Also the ability to remove the surfactant after it has been added widens the potential applications to environmentally sensitive areas like oil spill clean ups where in the past concerns have been raised.”

Chiral metal surfaces may help to manufacture pharmaceuticals; Novel approach could be used in pharmaceutical drug synthesis

ScienceDaily (Oct. 26, 2011) — New research shows how metal surfaces that lack mirror symmetry could provide a novel approach towards manufacturing pharmaceuticals.

These 'intrinsically chiral' metal surfaces offer potential new ways to control chiral chemistry, pointing to the intriguing possibility of using heterogeneous catalysis in drug synthesis. Such surfaces could also become the basis of new biosensor technologies.

A chiral object, such as your hand, is one that cannot be superposed on its mirror image. Chirality is fundamental in biochemistry. The building blocks of life -- amino acids and sugars -- are chiral molecules: their molecular structures can exist in either "left-handed" or "right-handed" forms (or "enantiomers").

A living organism may respond differently to the two enantiomers of a chiral substance. This is crucially important in the case of pharmaceutical drugs, where the therapeutic effect is often tied strongly to just one enantiomer of the drug molecule. Controlling chirality is therefore vital in pharmaceutical synthesis.

Research into controlling chiral synthesis focuses mainly on using homogeneous catalysts, where the catalyst is in the same phase as the reactants and products, such as a liquid added to a liquid-phase reaction. However, this poses significant practical challenges in recovering the valuable catalyst material from the mixture. To avoid this problem, an attractive alternative would be heterogeneous catalysis over a solid surface -- the type of catalysis used in catalytic converters in car exhaust systems, as well as in industrial Haber-Bosch synthesis of ammonia and Fischer-Tropsch synthesis of synthetic fuel, for example. The question then is how to achieve enantiomer-specific effects at a surface.

To help answer this question, scientists at the University of Cambridge have been probing the spontaneous self-organization of a simple chiral amino acid, alanine, into regular molecular arrays on copper single-crystal surfaces. Thanks to a powerful scanning tunnelling microscope, capable of resolving individual atoms and molecules, their work is revealing the various manifestations of chirality that occur, giving important clues to how they arise, and how they might be controlled and exploited.

Dr Stephen Driver, of the Department of Chemistry at the University of Cambridge, who led the experimental work, said: "We set out to investigate two distinct scenarios. In one scenario, the surface is non-chiral, so any chirality that we see can only arise from the chirality of the alanine molecule. In the other scenario, we move to a surface that is intrinsically chiral. Now the question becomes: do the two enantiomers of alanine behave differently on this chiral surface?"

On the non-chiral surface, the researchers found that alanine can self-organise into either of two patterns. In one of these, the self-organisation is driven by hydrogen bonding between the molecules, while the chiral centre has no discernable impact on the regular array. In the other structure, a network of long-range chiral boundaries punctuates the array, and the boundary chirality switches with molecular chirality.

Driver explained: "The implication is that the chiral centre is having a direct influence on the packing of two alanine neighbours at the boundary, and that the chirality of this pair propagates to the next pair and the next and so on, so that the chiral boundary is built up over a long range."

The chiral surface is created simply by choosing a surface orientation that lies away from any of the bulk mirror symmetry planes of the metal crystal. When the researchers added alanine, they found that the surface changes its local orientation, forming nanometre-scale facets. The two enantiomers of alanine self-organise into different chiral patterns: a strong, enantiomer-specific structural effect. This "proof of principle" could potentially be exploited in chiral recognition, in chiral synthesis (forming a chiral product from non-chiral reactants), and in chiral separations.

Driver added: "It looks like alanine can shape a comfortable, chiral bonding site for itself. The copper surface has the flexibility to adapt itself to the shape of the alanine molecule, and this shape is different for the two different molecular enantiomers."

The results imply that certain surface orientations will form stable, ordered structures with one molecular enantiomer but not the other: exactly the right conditions to promote chiral chemical effects.

Professor Sir David King, former Chief Scientific Advisor to the UK Government and current Director of the Smith School of Enterprise and the Environment at Oxford, brought together the team carrying out this research. "These results are very exciting," said King. "Tailoring the right surface to the right molecule should lead to strong enantiospecific effects. We see a real basis here for a breakthrough technology in the pharmaceuticals sector. It's something that pharma companies should be taking a close interest in."

The Cambridge team's findings are published in Topics in Catalysis.

Recommend this story on Facebook, Twitter,
and Google +1:

Other bookmarking and sharing tools:

Story Source:

The above story is reprinted from materials provided by University of Cambridge. The original story is licensed under a Creative Commons license.

Note: Materials may be edited for content and length. For further information, please contact the source cited above.

Journal Reference:

Marian L. Clegg, Leonardo Morales de la Garza, Sofia Karakatsani, David A. King, Stephen M. Driver. Chirality in Amino Acid Overlayers on Cu Surfaces. Topics in Catalysis, 2011; DOI: 10.1007/s11244-011-9758-y

Note: If no author is given, the source is cited instead.

Disclaimer: This article is not intended to provide medical advice, diagnosis or treatment. Views expressed here do not necessarily reflect those of ScienceDaily or its staff.

View the original article here