Scientists Produce World's First Magnetic Soap

The liquid crystal progression of each surfactant was investigated by the solvent penetration method (i.e. phase cut). A small amount of surfactant was placed on a microscope slide under a coverslip. The slide was mounted on the cover slide and heated until the sample was fluid and completely isotropic. After slow cooling (1.0 °C min-1) to 25 °C, a drop of water was added to the edge of the coverslip. As the water penetrated the surfactant, a concentration gradient was established, from water at one side to pure surfactant at the other, enabling the entire range of mesophases to be observed in the field of view. (Credit: Image courtesy of Institut Laue-Langevin (ILL))


ScienceDaily (Jan. 23, 2012) — Scientists from Bristol University have developed a soap, composed of iron rich salts dissolved in water, that responds to a magnetic field when placed in solution. The soap’s magnetic properties were shown with neutrons at the Institut Laue-Langevin to result from tiny iron-rich clumps that sit within the watery solution. The generation of this property in a fully functional soap could calm concerns over the use of soaps in oil-spill clean ups and revolutionise industrial cleaning products.


Scientists have long been searching for a way to control soaps (or surfactants as they are known in industry) once they are in solution to increase their ability to dissolve oils in water and then remove them from a system. The team at Bristol University have previously worked on soaps sensitive to light, carbon dioxide or changes in pH, temperature or pressure. Their latest breakthrough, reported inAngewandte Chemie, is the world’s first soap sensitive to a magnetic field.

Ionic liquid surfactants, composed mostly of water with some transition metal complexes (heavy metals like iron bound to halides such as bromine or chlorine) have been suggested as potentially controllable by magnets for some time, but it had always been assumed that their metallic centres were too isolated within the solution, preventing the long-range interactions required to be magnetically active.

The team at Bristol, lead by Professor Julian Eastoe produced their magnetic soap by dissolving iron in a range of inert surfactant materials composed of chloride and bromide ions, very similar to those found in everyday mouthwash or fabric conditioner. The addition of the iron creates metallic centres within the soap particles.

To test its properties, the team introduced a magnet to a test tube containing their new soap lying beneath a less dense organic solution. When the magnet was introduced the iron-rich soap overcame both gravity and surface tension between the water and oil, to levitate through the organic solvent and reach the source of the magnetic energy, proving its magnetic properties.

Once the surfactant was developed and shown to be magnetic, Prof Eastoe’s team took it to the Institut Laue-Langevin, the world’s flagship centre for neutron science, and home to the world’s most intense neutron source, to investigate the science behind its remarkable property.

When surfactants are added to water they are known to form tiny clumps (particles called micelles). Scientists at ILL used a technique called “small angle neutron scattering (SANS)” to confirm that it was this clumping of the iron-rich surfactant that brought about its magnetic properties.

Dr Isabelle Grillo, responsible of the Chemistry Laboratories at ILL: “The particles of surfactant in solution are small and thus difficult to see using light but are easily revealed by SANS which we use to investigate the structure and behaviour of all types of materials with typical sizes ranging from the nanometer to the tenth of micrometer.”

The potential applications of magnetic surfactants are huge. Their responsiveness to external stimuli allows a range of properties, such as their electrical conductivity, melting point, the size and shape of aggregates and how readily its dissolves in water to be altered by a simple magnetic on and off switch. Traditionally these factors, which are key to the effective application of soaps in a variety of industrial settings, could only be controlled by adding an electric charge or changing the pH, temperature or pressure of the system, all changes that irreversibly alter the system composition and cost money to remediate.

Its magnetic properties also makes it easier to round up and remove from a system once it has been added, suggesting further applications in environmental clean ups and water treatment. Scientific experiments which require precise control of liquid droplets could also be made easier with the addition of this surfactant and a magnetic field.

Professor Julian Eastoe, University of Bristol: “As most magnets are metals, from a purely scientific point of view these ionic liquid surfactants are highly unusual, making them a particularly interesting discovery. From a commercial point of view, though these exact liquids aren’t yet ready to appear in any household product, by proving that magnetic soaps can be developed, future work can reproduce the same phenomenon in more commercially viable liquids for a range of applications from water treatment to industrial cleaning products.”

Peter Dowding an industrial chemist, not involved in the research: “Any systems which act only when responding to an outside stimulus that has no effect on its composition is a major breakthrough as you can create products which only work when they are needed to. Also the ability to remove the surfactant after it has been added widens the potential applications to environmentally sensitive areas like oil spill clean ups where in the past concerns have been raised.”

Teaching algae to make fuel: New process could lead to production of hydrogen using bioengineered microorganisms

ScienceDaily (May 24, 2011) — Many kinds of algae and cyanobacteria, common water-dwelling microorganisms, are capable of using energy from sunlight to split water molecules and release hydrogen, which holds promise as a clean and carbon-free fuel for the future. One reason this approach hasn't yet been harnessed for fuel production is that under ordinary circumstances, hydrogen production takes a back seat to the production of compounds that the organisms use to support their own growth.

But Shuguang Zhang, associate director of MIT's Center for Biomedical Engineering, and postdocs Iftach Yacoby and Sergii Pochekailov, together with colleagues at Tel Aviv University in Israel and the National Renewable Energy Laboratory in Colorado, have found a way to use bioengineered proteins to flip this preference, allowing more hydrogen to be produced.

"The algae are really not interested in producing hydrogen, they want to produce sugar," Yacoby says -- the sugar is what they need for their own survival, and the hydrogen is just a byproduct. But a multitasking enzyme, introduced into the liquid where the algae are at work, both suppresses the sugar production and redirects the organisms' energies into hydrogen production. The work is described in a paper being published online this week in the Proceedings of the National Academy of Sciences, and was supported in part by a European Molecular Biology Organization postdoctoral fellowship, the Yang Trust Fund and the U.S. Department of Energy's National Renewable Energy Laboratory.

Adding the bioengineered enzyme increases the rate of algal hydrogen production by about 400 percent, Yacoby says. The sugar production is suppressed but not eliminated, he explains, because "if it went to zero, it would kill the organism."

The research demonstrates for the first time how the two processes carried out by algae compete with each other; it also shows how that competition could be modified to favor hydrogen production in a laboratory environment. Zhang and Yacoby plan to continue developing the system to increase its efficiency of hydrogen production.

"It's one step closer to an industrial process," Zhang says. "First, you have to understand the science" -- which has been achieved through this experimental work. Now, developing it further -- through refinements to produce a viable commercial system for hydrogen-fuel manufacturing -- is "a matter of time and money," Zhang says.

Ultimately, such a system could be used to produce hydrogen on a large scale using water and sunlight. The hydrogen could be used directly to generate electricity in a fuel cell or to power a vehicle, or could be combined with carbon dioxide to make methane or other fuels in a renewable, carbon-neutral way, the researchers say.

In the long run, "the only viable way to produce renewable energy is to use the sun, [either] to make electricity or in a biochemical reaction to produce hydrogen," Yacoby says. "I believe there is no one solution," he adds, but rather many different approaches depending on the location and the end uses.

This particular approach, he says, is simple enough that it has promise "not just in industrialized countries, but in developing countries as well" as a source of inexpensive fuel. The algae needed for the process exist everywhere on Earth, and there are no toxic materials involved in any part of the process, he says.

"The beauty is in its simplicity," he says.

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by Massachusetts Institute of Technology. The original article was written by David L. Chandler.

Journal Reference:

I. Yacoby, S. Pochekailov, H. Toporik, M. L. Ghirardi, P. W. King, S. Zhang. Photosynthetic electron partitioning between [FeFe]-hydrogenase and ferredoxin:NADP -oxidoreductase (FNR) enzymes in vitro. Proceedings of the National Academy of Sciences, 2011; DOI: 10.1073/pnas.1103659108

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

View the original article here

Teaching algae to make fuel: New process could lead to production of hydrogen using bioengineered microorganisms

ScienceDaily (May 24, 2011) — Many kinds of algae and cyanobacteria, common water-dwelling microorganisms, are capable of using energy from sunlight to split water molecules and release hydrogen, which holds promise as a clean and carbon-free fuel for the future. One reason this approach hasn't yet been harnessed for fuel production is that under ordinary circumstances, hydrogen production takes a back seat to the production of compounds that the organisms use to support their own growth.

But Shuguang Zhang, associate director of MIT's Center for Biomedical Engineering, and postdocs Iftach Yacoby and Sergii Pochekailov, together with colleagues at Tel Aviv University in Israel and the National Renewable Energy Laboratory in Colorado, have found a way to use bioengineered proteins to flip this preference, allowing more hydrogen to be produced.

"The algae are really not interested in producing hydrogen, they want to produce sugar," Yacoby says -- the sugar is what they need for their own survival, and the hydrogen is just a byproduct. But a multitasking enzyme, introduced into the liquid where the algae are at work, both suppresses the sugar production and redirects the organisms' energies into hydrogen production. The work is described in a paper being published online this week in the Proceedings of the National Academy of Sciences, and was supported in part by a European Molecular Biology Organization postdoctoral fellowship, the Yang Trust Fund and the U.S. Department of Energy's National Renewable Energy Laboratory.

Adding the bioengineered enzyme increases the rate of algal hydrogen production by about 400 percent, Yacoby says. The sugar production is suppressed but not eliminated, he explains, because "if it went to zero, it would kill the organism."

The research demonstrates for the first time how the two processes carried out by algae compete with each other; it also shows how that competition could be modified to favor hydrogen production in a laboratory environment. Zhang and Yacoby plan to continue developing the system to increase its efficiency of hydrogen production.

"It's one step closer to an industrial process," Zhang says. "First, you have to understand the science" -- which has been achieved through this experimental work. Now, developing it further -- through refinements to produce a viable commercial system for hydrogen-fuel manufacturing -- is "a matter of time and money," Zhang says.

Ultimately, such a system could be used to produce hydrogen on a large scale using water and sunlight. The hydrogen could be used directly to generate electricity in a fuel cell or to power a vehicle, or could be combined with carbon dioxide to make methane or other fuels in a renewable, carbon-neutral way, the researchers say.

In the long run, "the only viable way to produce renewable energy is to use the sun, [either] to make electricity or in a biochemical reaction to produce hydrogen," Yacoby says. "I believe there is no one solution," he adds, but rather many different approaches depending on the location and the end uses.

This particular approach, he says, is simple enough that it has promise "not just in industrialized countries, but in developing countries as well" as a source of inexpensive fuel. The algae needed for the process exist everywhere on Earth, and there are no toxic materials involved in any part of the process, he says.

"The beauty is in its simplicity," he says.

Story Source:

The above story is reprinted (with editorial adaptations by ScienceDaily staff) from materials provided by Massachusetts Institute of Technology. The original article was written by David L. Chandler.

Journal Reference:

I. Yacoby, S. Pochekailov, H. Toporik, M. L. Ghirardi, P. W. King, S. Zhang. Photosynthetic electron partitioning between [FeFe]-hydrogenase and ferredoxin:NADP -oxidoreductase (FNR) enzymes in vitro. Proceedings of the National Academy of Sciences, 2011; DOI: 10.1073/pnas.1103659108

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

View the original article here